FINAL EXAM CISCO CCNA DISCOVERY 1 VERSION 4.0 2012-2013

1.  Two switches are interconnected in the same wiring closet. What type of cable is typically used for this connection?
 
*UTP crossover
 

 
 

2.  When terminating a UTP cable, why is it important to push the wires all the way into the end of the connector?
 
*to ensure good electrical 
 

 
3. Which two causes of networking problems are related to the physical layer? (Choose two.)
 
*damaged cables and connectors
*overheated components
 

 
4.  What is the default subnet mask for the IP address 128.107.23.10?
* 255.255.0.
 

 
5.  Some new features are available for the OS that is currently running on a user's PC. What method should be chosen so that the user can install these new feature sets?
 
*upgrade
 

 
6.  Refer to the exhibit. Assume that the command output is from a wireless DHCP client that is connected to a Linksys integrated router. What can be deduced from the output?
 
*The wireless connection is operational.
 

 
7.   Refer to the exhibit. The security policy of an organization requires users to change their password every week. Which type of security policy is this?
 
* password
 
8. TCP/IP data transmission between the source and destination
host is de-encapsulated in four steps:

A. The TCP header is removed.
B. Bits are decoded and the destination MAC address is recognized.
C. The IP header is removed and the contents are passed to the next layer.
D. The Ethernet header and trailer are removed.
 
What is the correct sequence of these steps?
*B, C, D, A
 

 
9.  Which type of network supports DHCP and DNS services for network users in a network domain?
 
*ad hoc
 

 
10.  Which of the following statements best describes DNS?
*DNS servers are used to map a name to an IP address.
 

 
11.  A computer joins the network and announces itself to all hosts on the LAN. What type of message does the computer send out?
*broadcast
 

 
12.  When NAT is employed in a small office, which address type is typically used for hosts on the local LAN?
 
*private IP addresses
 

 
13.  How do ISPs obtain public IP addresses?
 
*They obtain the addresses from the Internet registry.
 

 
14.  Which value would be considered the physical address for data that is sent across an Ethernet segment?
 
*MAC address
 

 
15.  What is true about a wireless access point that is equipped with an omnidirectional antenna?
 
*radiates the signal equally in all directions
 

 
16.  Which wireless protocol is used for encryption?
 
*WEP
 

 
17.  A technician can ping the public registered IP address of www.cisco.com but cannot successfully ping the URL address www.cisco.com from a host computer. Which software utility can the technician use to diagnose the problem?
 
*Ipconfig
 

 
18.  Refer to the exhibit. A network technician is statically assigning an IP address to a PC. The default gateway is correct. What would be a valid IP address to assign to the host?
 
*128.107.255.1
 

 
19.  What two commands can be used to form a new binding if client information does not agree with the DHCP client table? (Choose two.)
 
*ipconfig /release
 
*ipconfig /renew
 

 
20.  Which statement accurately describes a recommended strategy for end users to employ when they interact with a help desk technician?
 
*Provide as much information about the problem as possible.
 

 
21.  A home user was successfully browsing the Internet earlier in the day but is now unable to connect. A ping command from a wireless laptop to a wired PC in the LAN is successful, but the nslookup command fails to resolve a website address. The user decides to analyze the LEDs on the Linksys router to verify connectivity. Which LED should be of main concern in this situation?
 
*1-4 Ethernet LEDs
 

 
22.  Refer to the exhibit. An organization needs to connect PC systems that use private IP addressing to the Internet. The organization has multiple systems that need to access the Internet, but were only able to purchase one public IP address. What should be activated on the Linksys integrated router to achieve this goal?
 
*NAT
 

 
23.  What is a function of NAT when it is configured on a firewall appliance?
 
*prevents or allows access to specific application types based on port numbers
 

 
24.  Which protocol is used to transfer files among network devices and perform file-management functions?
 
*FTP
 

 
25.  Which statement is true concerning stateful packet inspection?
 
*Access is permitted only if it is a legitimate response to a request from an internal host.
 

 
26. Which network design layer provides a connection point for end user devices to the network?
 
*network
 

 
27.  What are two examples of peripheral output devices? (Choose two.)
 
*headphones
 
 *printer
 

 
28.  As an assignment, a computer science student needs to present data in binary format. What are the two possible values that the student can use? (Choose two.)
 
*0
 
*1
 

 
29.  Why would a corporate web server be assigned a public IP address instead of a private IP address?
 
*The public address can be routed on the Internet.
 

 
30.  What two pieces of information should a help desk technician document while troubleshooting connectivity issues with an end user? (Choose two.)
 
*if the user can ping the default gateway address
 
*whether the PC uses dynamic or static IP addressing
 

 
31.  Refer to the exhibit. What is the purpose of assigning a network name of University?
 
*It identifies the wireless LAN.
 

 
32.  What is an advantage of purchasing a custom-built computer?.
 
*The user can specify high-performance components to meet specific needs.
 

 
33.  What is specified by the network number in an IP address?
 
*the network to which the host belongs
 

 
34.  After attaching four PCs to the switch ports, configuring the SSID and setting authentication properties for a small office network, a technician successfully tests the connectivity of all PCs that are connected to the switch and WLAN. A firewall is then configured on the device prior to connecting it to the Internet. What type of network device includes all of the described features?
 
*ISR router
 


 
35.  What is a major characteristic of asymmetric Internet service?
 
*Download speeds are faster than upload speeds.
 

 
36.  Which two components are necessary for a wireless client to be installed on a WLAN? (Choose two.)
 
*wireless NIC
 
*wireless bridge
 

 
37. Which two statements are true about network applications? (Choose two.)
 
*Network applications are accessible from a remote computer.
 
*Network applications are installed on a network server.
 

 
38. Refer to the exhibit. Assume that the exhibited output is from a host that is connected to a Linksys integrated router. What is the first thing that should be checked if using a bottom-up troubleshooting approach?
 
*the link status LED on the front of the router
 

 
39.  or devices that do not autosense, which connection requires a crossover cable?
 
*PC port to PC port
 

 
40.  Which type of computer has an integrated mouse?
 
*laptop
 

 
41.  A network designer is working with a small company to determine the network type best suited to the needs of the company. Which two characteristics could the designer use to describe a peer-to-peer network to the owner of the company? (Choose two.)
 
*easy to install
 
*low cost
 
42.  Users are complaining that they get no response from a new application server. What tool would determine if the client application is successfully connecting to the application on the new server?
 
 *ping
 

 
43.  Which function is available on the network when TCP is used as the transport protocol?
 
 *traffic encryption
 

 
44.  For the second time in a week, workstations on a LAN are not able to log into the server. The technician fixed the problem the first time, but cannot remember the steps taken to solve it. What aspect of the troubleshooting process has the technician neglected?
 
*documenting the troubleshooting process
 

 
45.  A user is unable to send e-mail. To begin troubleshooting this problem, the network technician uses the browser on the PC and tries to access some popular Internet websites. Which troubleshooting approach is being followed?
 
* top-down
 

 
46.  Refer to the exhibit. Why would a network administrator use the network mode that is shown?
 
*to support hosts that use different 802.11 standards
 

 
47.  Which of the following are transport layer protocols of the TCP/IP model? (Choose two.)
 
*UDP
 
*TCP
 

 
48.  Which Windows command is used to display the configured IP address, subnet mask, and default gateway?
 
*ipconfig
 

 
50.  What destination IP address is used in a unicast packet?
 
*a specific host
SOAL PAKET 2 FINAL CCNA DISCOVERY 1 VERSION 4.0
1
Refer to the exhibit. The security policy of an organization allows employees to connect to the office intranet from their homes. Which type of security policy is this?
    remote access


2    
What two commands can be used to form a new binding if client information does not agree with the DHCP client table? (Choose two.)
    ipconfig /release
    ipconfig /renew


3    
For devices that do not autosense, which connection requires a crossover cable?
    PC port to PC port


4    
Which adapter card would be required for a PC to exchange information with other PCs on a LAN?
    NIC


5    
Which wireless technology provides mutual two-way authentication?
    EAP


6    
What component of a personal computer is responsible for the processing of all data?
    CPU


7    
What statement describes the filtering of traffic via the use of Stateful Packet Inspection?
    It permits incoming packets that are legitimate responses to requests from internal hosts.


8    
Which protocol in its default configuration downloads e-mail messages to the client computer and deletes them from the server?
    POP3


9    
Which protocol is used to transfer files among network devices and perform file-management functions?
    FTP


10    
What is true about a wireless access point that is equipped with an omnidirectional antenna?
    radiates the signal equally in all directions


11    
Refer to the exhibit. Which statement is true based on the information that is shown in the exhibit?
    All wireless devices that are connected to this AP must have an assigned SSID of College.


12    
Which of the following statements best describes DNS?
    DNS servers are used to map a name to an IP address.


13    
What is specified by the network number in an IP address?
    the network to which the host belongs


14    
Which two causes of networking problems are related to the physical layer? (Choose two.)
    damaged cables and connectors
    overheated components


15    
What wireless technology has the ability to communicate with many devices at the same time, makes use of the 2.4 GHz band, and is limited to low-speed, short-range communications?
    RF


16    
The help desk at a large packaging company receives a call from a user who is concerned about lost data files on the local PC. The help desk technician learns that the user clicked on an icon that appeared to be a program update, but no updates were scheduled for that program. What type of attack has likely occurred?
    worm


17    
What are two examples of peripheral input devices? (Choose two.)
    barcode reader
    digital camera


18    
Refer to the exhibit. Assume that the command output is from a wireless DHCP client that is connected to a Linksys integrated router. What can be deduced from the output?
    The wireless connection is operational.


19    
What does it mean when a problem is being escalated by a helpdesk?
    The helpdesk is moving the problem to a higher level support staff.


20    
Which three statements describe an IP address? (Choose three.)
    An IP address is known as a logical address.
    An IP address is found in the Layer 2 header during transmission.
    An IP address is unique within the same local network.


21    
What advantage does a peer-to-peer network have over a client-server network?
    It eliminates the need for centralized administration.


22    
A wireless DHCP client cannot connect to the Internet through a Linksys integrated router. When you type ipconfig on the host, no IP address, subnet mask, or default gateway shows. What are two of the first things you will check? (Choose two.)
    if the wireless client is configured for DHCP
    if the correct default gateway is configured on the integrated router


23    
Refer to the exhibit. If H4 sends a message to H1 and the destination MAC address is in the MAC table for both Switch1 and Switch2, which host devices will receive the message?
    all hosts that are connected to Switch1 and Switch2


24    
What is the purpose of pop-up blocker software?
    It prevents the display of advertisement windows.


25    
A host wants to send information simultaneously to all the other hosts in the same network. Which domain will support this type of communication?
    broadcast


26    
Which portion of the packet does a router use to forward the packet to the destination?
    destination IP address


27    
What measurement is commonly used to describe communication speed when transferring data?
    bps


28    
What procedure will help prevent users from detecting a wireless network?
    Disable SSID broadcasts.


29    
How does a crossover cable connect two routers?
    It connects the pins that are used for transmitting on one router to the pins that are used for receiving on the other router.


30    
Which Windows PC command line utility can be used to discover the path that a packet takes to reach a destination?
    tracert


31
What destination IP address is used in a unicast packet?
    a specific host


32    
Which two automatic addressing assignments are supported by DHCP? (Choose two.)
    subnet mask
    default gateway address


33    
Which network design layer provides hosts with initial connectivity to the network?
    distribution


34    
Which installation option should be chosen when the current operating system is too damaged to work properly?
    clean install


35    
What are two advantages of purchasing a custom-built computer? (Choose two.)
    user can specify higher performance components
    supports higher-end graphics and gaming applications


36    
When would infrared be used to connect network devices?
    when synchronizing a PC with a PDA that is in line of sight


37    
For the second time in a week, workstations on a LAN are not able to log into the server. The technician fixed the problem the first time, but cannot remember the steps taken to solve it. What aspect of the troubleshooting process has the technician neglected?
    identifying the problem


38    
What are two characteristics of IPv4 addresses? (Choose two.)
    They consist of two parts.
    They are Layer 2 addresses and are different for every computer.


39    
Which two statements are true about local applications? (Choose two.)
    They are stored on the local hard disk.
    They run on the computer where they are installed.


40    
Which picture shows a USB port on a PC?
(YOU CAN ANSWER IT)


41    
Why would a corporate web server be assigned a public IP address instead of a private IP address?
    The public address can be routed on the Internet.


42    
Refer to the exhibit. An educational institution needs to connect PC systems that use private IP addressing to the Internet. They have multiple systems that need to access the Internet, but were only able to purchase one public IP address. What should be activated on the Linksys integrated router to achieve this goal?
    NAT


43    
What type of computer would most likely use a docking station?
    laptop


44    
What is the default subnet mask for the IP address 128.107.23.10?
    255.255.0.0


45    
What are two characteristics of a MAC address? (Choose two.)
    It is displayed in HEX characters.
    It is a physical address.


46
Which three addresses belong to the category of private IP addresses? (Choose three.)
    10.0.0.1
    172.16.0.1
    192.168.31.19


47    
Refer to the exhibit. A network technician is statically assigning an IP address to a PC. The default gateway is correct. What would be a valid IP address to assign to the host?
    128.107.255.1


48    
What is an ISP?
    It is an organization that enables individuals and businesses to connect to the Internet.


49    
Which attribute must be the same for wireless devices on one network to be able to communicate with devices on a different network?
    default gateway


50    
Which statement accurately describes a recommended strategy for end users to employ when they interact with a help desk technician?
    Provide as much information about the problem as possible.


51    
Refer to the exhibit. Which option correctly represents the encapsulation of a packet that is sent by Host1 to the web server?
(D)


52    
Which Windows command is used to display the configured IP address, subnet mask, and default gateway?
    ipconfig
SOAL PAKET 3 FINAL CCNA DISCOVERY 1 VERSION 4.0

1

Refer to the exhibit. A PC requests an IP address from the server. Which two protocols are used at the TCP/IP application layer and the internetwork layer? (Choose two.)
DHCP
FTP
IP
TCP
UDP

2
TCP/IP data transmission between the source and destination host is de-encapsulated in four steps: 

A. The TCP header is removed.
B. Bits are decoded and the destination MAC address is recognized.
C. The IP header is removed and the contents are passed to the next layer.
D. The Ethernet header and trailer are removed.

What is the correct sequence of these steps?
A, B, C, D
A, C, B, D
B, C, D, A
B, D, C, A
C, A, B, D

3
What is the function of the DNS server?
It assigns IP addresses to clients.
It accepts HTTP requests from clients.
It maps a hostname to a corresponding IP address.
It manages the domain that clients are assigned to.

4
Which two automatic addressing assignments are supported by DHCP? (Choose two.)
local server address
subnet mask
default gateway address
physical address of the recipient
physical address of the sender

5
What measurement is commonly used to describe communication speed when transferring data?
bps
cps
Hz
MB

6

Refer to the exhibit. A user on host A sends an e-mail to the user on host B. Which type of message does host A send?
broadcast
multicast
simulcast
unicast

7
As an assignment, a computer science student needs to present data in binary format. What are the two possible values that the student can use? (Choose two.)
0
1
2
A
F

8
Which term is associated with logical addressing?
IP addresses
port addresses
physical addresses
Media Access Control addresses

9
Which three statements describe an IP address? (Choose three.)
An IP address is known as a logical address.
An IP address uses a 30-bit addressing scheme.
An IP address is found in the Layer 2 header during transmission.
The network portion of an IP address is burned into a network interface card.
An IP address is unique within the same local network.
The network portion of an IP address will be the same for all hosts that are connected to the same local network.

10
Refer to the exhibit. Which option correctly represents the encapsulation of a packet that is sent by Host1 to the web server?
<<< TRUE

11
When are leased lines typically used?
when low bandwidth is required
for home and small business connectivity
when a dedicated digital data line is necessary
as a less expensive option to cable and DSL modem service

12
What are two advantages of purchasing a custom-built computer? (Choose two.)
usually a lower cost
no waiting period for assembly
user can specify higher performance components
supports higher-end graphics and gaming applications
fewer components to replace

13
What is an ISP?
It is a standards body that develops cabling and wiring standards for networking.
It is a protocol that establishes how computers within a local network communicate.
It is an organization that enables individuals and businesses to connect to the Internet.
It is a networking device that combines the functionality of several different networking devices in one.

14
Which statement accurately describes what network devices do in the distribution layer of the three layer design model?
They interconnect individual hosts.
They interconnect multiple companies.
They interconnect local network segments.
They interconnect the company network to the ISP.

15
Which network design layer provides hosts with initial connectivity to the network?
access
core
distribution
network

16
What statement describes the filtering of traffic via the use of Stateful Packet Inspection?
It recognizes and filters predefined URLs
It permits access that is based on the application.
It permits access based on IP or MAC addresses.
It permits incoming packets that are legitimate responses to requests from internal hosts.
It translates an internal address or group of addresses into a public address that is sent across the network.

17
What advantage does a peer-to-peer network have over a client-server network?
It increases security.
It increases scalability.
It produces a higher performance for hosts.
It eliminates the need for centralized administration.

18
After attaching four PCs to the switch ports, configuring the SSID and setting authentication properties for a small office network, a technician successfully tests the connectivity of all PCs that are connected to the switch and WLAN. A firewall is then configured on the device prior to connecting it to the Internet. What type of network device includes all of the described features?
switch
ISR router
firewall appliance
standalone wireless access point

19
Which portion of the packet does a router use to forward the packet to the destination?
source IP address
user data
destination IP address
control information
destination MAC address

20
Refer to the graphic. Based on the information that is shown, what statement is true?
This configuration would be commonly found in an ad hoc wireless network.
Any wireless client that is attached to this access point would have the same IP address and SSID.
All wireless devices that are connected to this access point must have an assigned SSID of Academy.
In addition to accepting wireless client requests, this access point must connect to the wired network.

21
What is the function of a physical topology map?
records IP addressing of each host
records hostnames and applications
organizes groups of hosts by how they use the network
shows where wiring is installed and the locations of network devices

22
Which value represents the host portion of IP address 128.107.10.11 with a subnet mask of 255.255.0.0?
.10
.10.11
128.107
.107.10.11
128.107.10

23
What is specified by the host bits in an IP address?
broadcast identity of the network
identity of the computer on the network
network that is being addressed
network to which the host belongs

24
What describes the external IP address that is obtained by a router through a cable or DSL modem?
a public address that is obtained from ICANN
a private address that is manually configured by the administrator
a public address that is obtained through DHCP from the ISP
a private address that converts to a public address on the internal LAN

25
Refer to the exhibit. Which pair of addresses would be appropriate to use for PC1 and PC2 to establish a workgroup using private addresses?
127.0.0.1 and 127.0.0.2
172.16.4.2 and 172.16.4.3
172.16.5.1 and 192.168.3.2
198.133.219.25 and 198.133.219.26

26
Under what circumstance would it be appropriate to use private IP addresses?
for communication between two ISPs
for a network that is directly connected to the Internet
for addresses that are used exclusively within an organization.
for a host with more than one direct connection to the Internet

27
Which wireless protocol is used for encryption?
EAP
Open
PSK
WEP

28
Refer to the exhibit. The security policy of an organization requires users to change their password every week. Which type of security policy is this?
acceptable use
network maintenance
password
remote access

29
Which type of network attack occurs when an unauthorized person tries to persuade a user to share a network user ID and password?
brute force
denial of service
data manipulation
social engineering

30
A system administrator routinely monitors failed login attempts on a server. If the administrator sees an extremely high number of failed attempts by a single user who is trying multiple password combinations, what type of attack is in progress?
brute force
phishing
SYN flood
virus
vishing

31
What is the purpose of spam filter software?
It detects and removes spyware.
It detects and removes viruses.
It prevents the display of advertisement windows.
It examines incoming e-mail messages to identify the unsolicited ones.

32
Refer to the exhibit. An educational institution needs to connect PC systems that use private IP addressing to the Internet. They have multiple systems that need to access the Internet, but were only able to purchase one public IP address. What should be activated on the Linksys integrated router to achieve this goal?
authentication
DHCP
encryption
firewall
NAT
WEP

33
How does a crossover cable connect two routers?
It connects the pins that are used for receiving on one router to the pins that are used for receiving on the other router.
It connects the pins that are used for transmitting on one router to the pins that are used for receiving on the other router.
It disconnects the transmit pins and uses only the receive pins.
It uses the same pins for transmitting and receiving.

34
Which wireless technology allows only one-to-one connections and is typically used for short-range, line-of-sight communication?
GSM
Wi-Fi
Infrared
Bluetooth

35
Which picture shows a USB port on a PC?
<<< TRUE

36
Which type of computer has an integrated mouse?
desktop
laptop
mainframe
server
pocket PC

37
Which adapter card would be required for a PC to exchange information with other PCs on a LAN?
NIC
video card
sound card
internal modem

38
What component of a personal computer is responsible for the processing of all data?
RAM
CPU
firewall
system bus
operating system

39
Which wireless component allows wireless clients to gain access to a wired network?
PDA
STA
access point
wireless bridge

40
Which two components are configured via software in order for a PC to participate in a network environment? (Choose two.)
MAC address
IP address
kernel
shell
subnet mask

41
Which Windows PC command line utility can be used to discover the path that a packet takes to reach a destination?
ping
netstat
tracert
nslookup
ipconfig

42
Refer to the exhibit. A wireless client is unable to connect to a Linksys WRT300N access point that is using network 192.168.1.0/24 for its LAN and WLAN clients. What could cause the problem?
The IP address is incorrect.
The subnet mask is incorrect.
The default gateway is incorrect.
All addresses are correct, so the SSID must be incorrect.

43
What two commands can be used to form a new binding if client information does not agree with the DHCP client table? (Choose two.)
ipconfig /release
ipconfig /all
ipconfig /flushdns
ipconfig /renew
ipconfig

44
Which device is often configured to act as both a DHCP client and a DHCP server?
home PC
ISP modem
wireless-enabled laptop
integrated services router

45
Refer to the exhibit. What is the effect of setting the security mode to WEP on the Linksys integrated router?
The WEP security mode enables the AP to inform clients of its presence.
The WEP security mode encrypts network traffic during transmission between the AP and the wireless client.
The WEP security mode generates a dynamic key each time a client establishes a connection with the AP.
The WEP security mode identifies the WLAN.

46
Which installation option should be chosen when the current operating system is too damaged to work properly?
upgrade
multi-boot
clean install
virtualization

47
Which two causes of networking problems are related to the physical layer? (Choose two.)
disconnected cables
improper operation of cooling fans
incorrect MAC address
incorrect default gateway
incorrect subnet mask

48
A user in a small office is unable to connect to the Internet. The user examines the physical connections to the ISR, a Linksys WRT300N, and notices a solid green LED on the port that is wired to the computer. What does the LED indicate about the current state of the port?
The ISR is making adjustments to the port.
The device is plugged in and traffic is flowing.
The computer is plugged in but no traffic is flowing.
The ISR does not detect that the computer is plugged in.

49
Refer to the exhibit. PC1 is unable to access the web server at 209.165.200.226/27. Based on the provided output, what is the most likely cause of the problem?
PC1 is not plugged in to RTR1.
Port 80 is already in use on PC1.
No DNS server is configured on PC1.
PC1 is configured with an incorrect IP address and default gateway.

50
What does it mean when a problem is being escalated by a helpdesk?
The helpdesk is following up on a resolved problem.
The helpdesk has made the problem a lower priority.
The helpdesk has solved the problem and is closing the ticket.
The helpdesk is moving the problem to a higher level support staff. 



SOAL PAKET 4 FINAL CCNA DISCOVERY 1 VERSION 4.0


1
Which protocol is used to transfer files among network 
devices and perform file-management functions?
DNS
FTP
HTML
HTTP

2
What is the function of the DNS server?
It assigns IP addresses to clients.
It accepts HTTP requests from clients.
It maps a hostname to a corresponding IP address.
It manages the domain that clients are assigned to.

3
A computer joins the network and announces itself to all hosts on the LAN. 
What type of message does the computer send out?
broadcast
simulcast
multicast
unicast

4
As an assignment, a computer science student needs to 
present data in binary format. 
What are the two possible values that the student can use? (Choose two.)
0
1
2
A
F

5
What type of message is sent to a specific group of hosts?
static
unicast
dynamic
multicast
broadcast

6
Which term is associated with logical addressing?
IP addresses
port addresses
physical addresses
Media Access Control addresses

7
What destination IP address is used in a unicast packet?
a specific host
a group of hosts
all hosts on the network
the network broadcast address

8
Which value would be considered the physical address for data that is sent across an Ethernet segment?
IP address
port address
MAC address
network address

9
Refer to the exhibit. Which option correctly represents the encapsulation of a packet that is sent by
Host1 to the web server?
<<< TRUE

10
What are two examples of peripheral output devices? (Choose two.)
barcode reader
digital camera
external DVD
headphones
printer

11
What does the term "attenuation" mean in data communication?
loss of signal strength as distance increases
time for a signal to reach its destination
leakage of signals from one cable pair to another
strengthening of a signal by a networking device

12
Which network design layer provides a connection point for end user devices to the network?
access
core
distribution
network

13
Which two statements are true about local applications? (Choose two.)
They run on the network.
An example of a local application is e-mail.
They are accessed from a remote computer.
They are stored on the local hard disk.
They run on the computer where they are installed.

14
Which portion of the packet does a router use to forward the packet to the destination?
source IP address
user data
destination IP address
control information
destination MAC address

15
Refer to the exhibit. H1 can ping H2, H3, and the Fa0/0 interface of router R1. H2 and H3 but not H1
can ping H4 and H5. What is a possible cause for the H1 failure?
Router R1 has no route to the destination network.
Switch S1 does not have an IP address configured.
The link between router R1 and switch S2 has failed.
Host H1 does not have a default gateway configured.

16
Refer to the exhibit. If H4 sends a message to H1 and the destination MAC address is in the MAC table
 for both Switch1 and Switch2, which host devices will receive the message?
only H1
hosts H1 and H4
all hosts that are connected to Switch1
all hosts that are connected to Switch1 and Switch2

17
Refer to the exhibit. Which statement is true based on the information that is shown in the exhibit?
All wireless devices that are connected to this AP must have an assigned SSID of College.
Any wireless client that is attached to this AP must have the same IP address and SSID.
The AP is not physically wired to the local LAN.
This configuration is found only in an ad hoc wireless network.

18
Refer to the exhibit. A home network is configured with the information in the graphic. A user tries to
manually create a new connection to the network using the SSIDCiscoclass. However, a connection
cannot be made. What could be the problem?
The SSID is case-sensitive.
The SSID must contain at least one number.
The SSID should be used with the default name.
The SSID must contain a minimum of 32 characters.

19
Refer to the exhibit. Assume that the command output is from a wireless DHCP client that is connected to
 a Linksys integrated router. What can be deduced from the output?
The DHCP configuration on the router needs to be verified.
The WEP key or SSID needs to be verified.
The wireless connection is operational.
The wireless NIC driver or the NIC itself needs to be reinstalled.

20
What will be one result of using a wireless infrastructure when designing the communications infrastructure
 for a new building?
Wireless devices will be easy to add or relocate.
Infrastructure installation will be difficult and expensive.
There will be less interference from outside electronic sources.
Data transmitted over wireless networks will be more secure than when transmitted over wired networks.

21
What is specified by the network number in an IP address?
the network to which the host belongs
the physical identity of the computer on the network
the node of the subnetwork which is being addressed
the broadcast identity of subnetwork

22
Refer to the exhibit. Given the use of default masks, which network will router R1 use as the destination
network for communications from PC1 to PC2?
128.0.0.0
128.107.0.0
128.107.1.0
192.0.0.0
192.135.0.0
192.135.14.0

23
Which two values represent the network number and default mask for the address 209.165.200.225? (Choose two.)
209.0.0.0
209.165.0.0
209.165.200.0
255.0.0.0
255.255.0.0
255.255.255.0

24
Which three address ranges can be used to depict private IP addresses? (Choose three.)
10.0.0.0 to 10.0.0.255
127.16.0.0 to 127.16.255.255
150.150.0.0 to 150.150.255.255
172.16.1.0 to 172.16.1.255
192.168.22.0 to 192.168.22.255
200.100.50.0 to 200.100.50.255

25
Under what circumstance would it be appropriate to use private IP addresses?
for communication between two ISPs
for a network that is directly connected to the Internet
for addresses that are used exclusively within an organization.
for a host with more than one direct connection to the Internet

26
Which part of the electromagnetic spectrum is commonly used to exchange data between a PDA and a computer?
FM
radar
infrared
ultraviolet

27
Refer to the exhibit. The security policy of an organization allows employees to connect to the office intranet from their homes. Which type of security policy is this?
acceptable use
incident handling
network maintenance
remote access

28
What wireless technology has the ability to communicate with many devices at the same time, makes use of the 2.4 GHz band, and is limited to low-speed, short-range communications?
RF
ISM
infrared
Bluetooth

29
Which type of network attack occurs when an unauthorized person tries to persuade a user to share a network user ID and password?
brute force
denial of service
data manipulation
social engineering

30
Refer to the exhibit. An organization needs to connect PC systems that use private IP addressing to the Internet. The organization has multiple systems that need to access the Internet, but were only able to purchase one public IP address. What should be activated on the Linksys integrated router to achieve this goal?
authentication
DHCP
encryption
firewall
NAT
WEP

31
A network administrator is setting up an application filtering firewall. Company security policy states that FTP sessions that are coming from the Internet and use the standard FTP port must be blocked. Which TCP/UDP port must the administrator block on the firewall to be in compliance?
21
23
53
80

32
What is the name for the contract between a customer and an ISP that specifies requirements for uptime and service response time?
DSL
IAB
NAP
SLA

33
How does a crossover cable make it possible for two "like devices" (for example, two switches) to communicate?
The transmit pins are disconnected and only the receive pins are used.
The transmit pins on one device are connected to the transmit pins on the other device.
The receive pins on one device are connected to the receive pins on the other device.
The transmit pins on one device are connected to the receive pins on the other device.

34
Which attribute must be the same for wireless devices on one network to 
be able to communicate with devices on a different network?
DNS server
MAC address
default gateway
operating system
wireless equipment vendor

35
Which picture shows a USB port on a PC?
<<< TRUE

36
A college network administrator is planning a wireless LAN to provide service in 
the student lounge and outdoor patio. The requirements include a range of at least
 80 meters and a speed of 30 Mb/s. Which wireless LAN standard meets these requirements?
802.11
802.11a
802.11b
802.11g

37
Which type of computer has an integrated mouse?
desktop
laptop
mainframe
server
pocket PC

38
What is true about a wireless access point that is equipped with an omnidirectional antenna?
concentrates signal in one direction
typically used in bridging applications
radiates the signal equally in all directions
provides the greatest transmission distance of all antenna types that are used by APs

39
What are two ways that a user can interact with an operating system shell? (Choose two.)
CLI
OS
GUI
NIC
kernel

40
Refer to the exhibit. Assume that the exhibited output is from a host that is connected to a 
Linksys integrated router. What is the first thing that should be checked if using a bottom-up 
troubleshooting approach?
the default gateway on the host
the IP address on the host
the IP address on the router
the link status LED on the front of the router
the subnet mask on the host

41
For devices that do not autosense, which connection requires a crossover cable?
hub port to router port
PC to hub port
PC to switch port
PC port to PC port

42
Which statement is true about UTP cable termination?
Cables with RJ-45 connectors are always preterminated.
An RJ-45 connector is used on only one end of the UTP cable.
Up to 2 to 3 inches of cable may be untwisted at each end of the cable to allow 
for easier installation of the RJ-45 connector.
The RJ-45 connector should be pushed over the wire jacket for a smooth connection.

43
A local PC has the correct configuration that is required to access the network. 
ping command that is sourced at the PC does not receive a response from a remote device. 
Which operating system command might be used to determine where the connection failed?
netstat
tracert
ipconfig
nslookup

44
An administrator is troubleshooting a network problem that involves the inability of 
users to reach Internet sites. During troubleshooting, the administrator is able to 
successfully ping web sites by their IP address, but pings to domain names are unsuccessful. 
Which service is most likely at fault?
DHCP
DNS
FTP
NAT

45
What two commands can be used to form a new binding if client information 
does not agree with the DHCP client table? (Choose two.)
ipconfig /release
ipconfig /all
ipconfig /flushdns
ipconfig /renew
ipconfig

46
Which installation option should be chosen when the current operating system is too 
damaged to work properly?
upgrade
multi-boot
clean install
virtualization

47
A user is unable to send e-mail. To begin troubleshooting this problem, t
he network technician uses the browser on the PC and tries to access some 
popular Internet websites. Which troubleshooting approach is being followed?
bottom-up
divide-and-conquer
top-down
trial and error

48
Which two causes of networking problems are related to the physical layer? (Choose two.)
damaged cables and connectors
incorrect addressing
incorrect subnet mask
overheated components
incorrect default gateway

49
Which statement accurately describes a recommended strategy for 
end users to employ when they interact with a help desk technician?
Provide as much information about the problem as possible.
Expect first-level help desk technicians to solve the problem, because they are highly-trained personnel.
Hand over the problem to the help desk professionals, then do not interfere with them.
At the beginning of the call, ask for the name and number of the supervisor of the help desk technician.

50
What does it mean when a problem is being escalated by a helpdesk?
The helpdesk is following up on a resolved problem.
The helpdesk has made the problem a lower priority.
The helpdesk has solved the problem and is closing the ticket.
The helpdesk is moving the problem to a higher level support staff

SOAL PAKET 5 FINAL CCNA DISCOVERY 1 VERSION 4.0


1. After attaching four PCs to the switch ports, configuring the SSID and setting authentication properties for a small office network, a technician successfully tests the connectivity of all PCs that are connected to the switch and WLAN. A firewall is then configured on the device prior to connecting it to the Internet. What type of network device includes all of the described features?

*firewall appliance



2. How do ISPs obtain public IP addresses?

*They obtain the addresses from the Internet registry.



3. Which wireless protocol is used for encryption?

*WEP



4. Refer to the exhibit. Why would a network administrator use the network mode that is shown?

*to support hosts that use different 802.11 standards



5. A computer joins the network and announces itself to all hosts on the LAN. What type of message does the computer send out?

*broadcast



6. Refer to the exhibit. Assume that the exhibited output is from a host that is connected to a Linksys integrated router. What is the first thing that should be checked if using a bottom-up troubleshooting approach?

*the link status LED on the front of the router



7. For the second time in a week, workstations on a LAN are not able to log into the server. The technician fixed the problem the first time, but cannot remember the steps taken to solve it. What aspect of the troubleshooting process has the technician neglected?

*documenting the troubleshooting process



8. Refer to the exhibit. What is the purpose of assigning a network name of University?

*It identifies the wireless LAN.



9. What two pieces of information should a help desk technician document while troubleshooting connectivity issues with an end user? (Choose two.)

*if the user can ping the default gateway address
 
*whether the PC uses dynamic or static IP addressing   

                                                                 

10. When NAT is employed in a small office, which address type is typically used for hosts on the local LAN?

*private IP addresses



11. What destination IP address is used in a unicast packet?

*a specific host


12. What is an advantage of purchasing a custom-built computer?

*The user can specify high-performance components to meet specific needs.



13. Which picture shows a USB port on a PC?      *PICTURE KE 2



14. Which of the following statements best describes DNS?

*DNS servers are used to map a name to an IP address.



15. Which statement accurately describes a recommended strategy for end users to employ when they interact with a help desk technician?

*Provide as much information about the problem as possible.



16. When terminating a UTP cable, why is it important to push the wires all the way into the end of the connector?

*to ensure good electrical contact



17. What is specified by the network number in an IP address?

*the network to which the host belongs


18. Which type of computer has an integrated mouse?

*laptop



19. Which network design layer provides a connection point for end user devices to the network?

*access



20. A network designer is working with a small company to determine the network type best suited to the needs of the company. Which two characteristics could the designer use to describe a peer-to-peer network to the owner of the company? (Choose two.)

*easy to install
 
*low cost



21. Refer to the exhibit. The security policy of an organization requires users to change their password every week. Which type of security policy is this?

*password



22. Which type of network supports DHCP and DNS services for network users in a network domain?

*client/server



23. Which two causes of networking problems are related to the physical layer? (Choose two.)

*damaged cables and connectors

*overheated components



24. Why would a corporate web server be assigned a public IP address instead of a private IP address?

*The public address can be routed on the Internet.



25. What two commands can be used to form a new binding if client information does not agree with the DHCP client table? (Choose two.)

*ipconfig /release
 
*ipconfig /renew


26. Refer to the graphic. Assume that the command output is from a wireless DHCP client that is connected to a Linksys integrated router. What can be deduced from the output?

*The wireless connection is good.
 


27. Refer to the exhibit. A network technician is statically assigning an IP address to a PC. The default gateway is correct. What would be a valid IP address to assign to the host?

*128.107.255.1



28. Which of the following are transport layer protocols of the TCP/IP model? (Choose two.)

*UDP
 
*TCP



29. Which two components are necessary for a wireless client to be installed on a WLAN? (Choose two.)

*wireless NIC
 
*wireless client software



30. For devices that do not autosense, which connection requires a crossover cable?

*PC port to PC port



31. Which Windows command is used to display the configured IP address, subnet mask, and default gateway?

*ipconfig



32. As an assignment, a computer science student needs to present data in binary format. What are the two possible values that the student can use? (Choose two.)

*0
 
*1



33. Which value would be considered the physical address for data that is sent across an Ethernet segment?

*MAC address



34. What is a function of NAT when it is configured on a firewall appliance?

*provides the capability to recognize and filter out specific types of attacks such as DoS



35. What are two examples of peripheral output devices? (Choose two.)

*headphones
 
*printer



36. Which statement is true concerning stateful packet inspection?

*Access is permitted only if it is a legitimate response to a request from an internal host.
 


37. Users are complaining that they get no response from a new application server. What tool would determine if the client application is successfully connecting to the application on the new server?

*ping



38. Which function is available on the network when TCP is used as the transport protocol?

*traffic encryption



39. Refer to the exhibit. An organization needs to connect PC systems that use private IP addressing to the Internet. The organization has multiple systems that need to access the Internet, but were only able to purchase one public IP address. What should be activated on the Linksys integrated router to achieve this goal?

*NAT



40. What is the default subnet mask for the IP address 128.107.23.10?

*255.255.0.0



41. Two switches are interconnected in the same wiring closet. What type of cable is typically used for this connection?

*UTP crossover



42. What is a major characteristic of asymmetric Internet service?

*Download speeds are faster than upload speeds.
 


43. TCP/IP data transmission between the source and destination host is de-encapsulated in four steps:

A. The TCP header is removed.

B. Bits are decoded and the destination MAC address is recognized.

C. The IP header is removed and the contents are passed to the next layer.

D. The Ethernet header and trailer are removed.

 What is the correct sequence of these steps?

*B, D, C, A



44. Some new features are available for the OS that is currently running on a user’s PC. What method should be chosen so that the user can install these new feature sets?

*upgrade



45. What is true about a wireless access point that is equipped with an omnidirectional antenna?

*radiates the signal equally in all directions



46. Which troubleshooting technique can be used to quickly restore user functionality without having to spend much time identifying the exact problem?

*trial and error



47. A home user was successfully browsing the Internet earlier in the day but is now unable to connect. A pingcommand from a wireless laptop to a wired PC in the LAN is successful, but the nslookup command fails to resolve a website address. The user decides to analyze the LEDs on the Linksys router to verify connectivity. Which LED should be of main concern in this situation?

*1-4 Ethernet LEDs



48. Which protocol is used to transfer files among network devices and perform file-management functions?

*FTP
 


49. Which two statements are true about network applications? (Choose two.)

*Network applications are accessible from a remote computer.
 
*Network applications are installed on a network server.



50. A technician can ping the public registered IP address of http://www.cisco.com but cannot successfully ping the URL address http://www.cisco.com from a host computer. Which software utility can the technician use to diagnose the problem?

*Ipconfig


CARA PENGGUNAAN KUNCI:
 1. Tekan "CTRL-F, lalu cari soal yang mirip dari ketiga paket diatas.

HARAP DIBACA SEBELUM MENGGUNAKAN KUNCI: 
1. Kemungkinan sangat KECIL soal anda mirip dengan punya teman anda.

2. Soal dari CISCO itu ada sekitar 300 YANG AKAN DIACAK, JADI SETIAP SISWA DAPAT 50 SOAL YANG BERBEDA (SAMA SEPERTI UN "Ujian Nasional")jadi kecil kemungkinan Dapat kunci yang update.

3. Insyaallah akan saya update kunci ini. 


NB: Sampaikan kepada orang yang membutuhkan, karna itu adalah PAHALA. :D 

www.ceaster.com Ceaster Corp